diff -x '*times*' -x '.*' -x '*.o' -Naur linux-2.4.17-orig/net/khttpd/README linux/net/khttpd/README
--- linux-2.4.17-orig/net/khttpd/README	Thu Nov 16 14:07:53 2000
+++ linux/net/khttpd/README	Mon May 27 22:43:43 2002
@@ -14,14 +14,15 @@
    other webservers in that it runs from within the Linux-kernel as a module 
    (device-driver).
 
-   kHTTPd handles only static (file based) web-pages, and passes all requests
-   for non-static information to a regular userspace-webserver such as Apache or 
-   Zeus. The userspace-daemon doesn't have to be altered in any way.
+   kHTTPd handles only static (file based) web-pages, and passes all requests 
+   for non-static information to a regular userspace-webserver such as Apache 
+   or Zeus. The userspace-daemon doesn't have to be altered in any way.
 
    Static web-pages are not a very complex thing to serve, but these are very
    important nevertheless, since virtually all images are static, and a large
    portion of the html-pages are static also. A "regular" webserver has little
-   added value for static pages, it is simply a "copy file to network"-operation.
+   added value for static pages, it is simply a "copy file to network"
+   operation.
    This can be done very efficiently from within the Linux-kernel, for example 
    the nfs (network file system) daemon performs a similar task and also runs 
    in the kernel.
@@ -44,6 +45,7 @@
  
    echo 1 > /proc/sys/net/khttpd/stop
    echo 1 > /proc/sys/net/khttpd/unload 
+   sleep 2
    rmmod khttpd
    
 
@@ -71,7 +73,7 @@
 
    Before you can start using kHTTPd, you have to configure it. This
    is done through the /proc filesystem, and can thus be done from inside
-   a script. Most parameters can only be set when kHTTPd is not active.
+   a script. Most parameters can only be set when kHTTPd is stopped.
 
    The following things need configuration:
 
@@ -117,26 +119,31 @@
 
    Port 8080
 
+   Starting kHTTPd
+   ===============
+   Once you have set up the configuration, start kHTTPD by running
+   echo 1 > /proc/sys/net/khttpd/start
+   It may take a jiffie or two to start.
 
-   
    Stopping kHTTPd
    ===============
-   In order to change the configuration, you should stop kHTTPd by typing
+   To stop kHTTPd, do
    echo 1 > /proc/sys/net/khttpd/stop
-   on a command-prompt.
+   It should stop in a jiffy or two.
 
-   If you want to unload the module, you should type
+   Unloading kHTTPd
+   ===============
+   To unload the module, do
+   echo 1 > /proc/sys/net/khttpd/stop
    echo 1 > /proc/sys/net/khttpd/unload
-   after stopping kHTTPd first.
+   #killall -HUP khttpd
+   sleep 2
+   rmmod khttpd
 
-   If this doesn't work fast enough for you (the commands above can wait for 
+   If this doesn't work fast enough for you (unloading can wait for 
    a remote connection to close down), you can send the daemons a "HUP"
    signal after you told them to stop. This will cause the daemon-threads to
    stop immediately. 
-
-   Note that the daemons will restart immediately if they are not told to
-   stop.
-
    
 
 4. Permissions
@@ -212,7 +219,21 @@
 	maxconnect	1000		Maximum number of concurrent
 					connections
 
-6. More information
+6. Known Issues
+   kHTTPd is *not* currently compatible with tmpfs.  Trying to serve
+   files stored on a tmpfs partition is known to cause kernel oopses
+   as of 2.4.18.  This is due to the same problem that prevents sendfile()
+   from being usable with tmpfs.  A tmpfs patch is floating around that seems
+   to fix this, but has not been released as of 27 May 2002.
+   kHTTPD does work fine with ramfs, though.
+
+   There is debate about whether to remove kHTTPd from the main
+   kernel sources.  This will probably happen in the 2.5 kernel series,
+   after which khttpd will still be available as a patch.
+
+   The kHTTPd source code could use a good spring cleaning.
+
+7. More information
 -------------------
    More information about the architecture of kHTTPd, the mailinglist and
    configuration-examples can be found at the kHTTPd homepage:
@@ -221,4 +242,6 @@
 
    Bugreports, patches, etc can be send to the mailinglist
    (khttpd-users@zgp.org) or to khttpd@fenrus.demon.nl
+   Mailing list archives are at 
+      http://lists.alt.org/mailman/listinfo/khttpd-users
 
diff -x '*times*' -x '.*' -x '*.o' -Naur linux-2.4.17-orig/net/khttpd/main.c linux/net/khttpd/main.c
--- linux-2.4.17-orig/net/khttpd/main.c	Sun Mar 25 18:14:25 2001
+++ linux/net/khttpd/main.c	Mon May 27 23:17:08 2002
@@ -95,11 +95,17 @@
 {
 	int CPUNR;
 	sigset_t tmpsig;
+	int old_stop_count;
 	
 	DECLARE_WAITQUEUE(main_wait,current);
 	
 	MOD_INC_USE_COUNT;
 
+	/* Remember value of stop count.  If it changes, user must have 
+	 * asked us to stop.  Sensing this is much less racy than 
+	 * directly sensing sysctl_khttpd_stop. - dank
+	 */
+	old_stop_count = atomic_read(&khttpd_stopCount);
 	
 	CPUNR=0;
 	if (cpu_pointer!=NULL)
@@ -125,11 +131,9 @@
 	atomic_inc(&DaemonCount);
 	atomic_set(&Running[CPUNR],1);
 	
-	while (sysctl_khttpd_stop==0)
+	while (old_stop_count == atomic_read(&khttpd_stopCount)) 
 	{
 		int changes = 0;
-				
-
 		
 		changes +=AcceptConnections(CPUNR,MainSocket);
 		if (ConnectionsPending(CPUNR))
@@ -194,11 +198,9 @@
 	
 	DECLARE_WAIT_QUEUE_HEAD(WQ);
 	
-	
 	sprintf(current->comm,"khttpd manager");
 	daemonize();
 	
-
 	/* Block all signals except SIGKILL and SIGSTOP */
 	spin_lock_irq(&current->sigmask_lock);
 	tmpsig = current->blocked;
@@ -206,42 +208,35 @@
 	recalc_sigpending(current);
 	spin_unlock_irq(&current->sigmask_lock);
 
-
 	/* main loop */
 	while (sysctl_khttpd_unload==0)
 	{
 		int I;
-		
+		int old_stop_count;
 		
 		/* First : wait for activation */
-		
-		sysctl_khttpd_start = 0;
-		
 		while ( (sysctl_khttpd_start==0) && (!signal_pending(current)) && (sysctl_khttpd_unload==0) )
 		{
 			current->state = TASK_INTERRUPTIBLE;
 			interruptible_sleep_on_timeout(&WQ,HZ); 
 		}
-		
 		if ( (signal_pending(current)) || (sysctl_khttpd_unload!=0) )
 		 	break;
+		sysctl_khttpd_stop = 0;
 		 	
 		/* Then start listening and spawn the daemons */
-		 	
 		if (StartListening(sysctl_khttpd_serverport)==0)
 		{
+			sysctl_khttpd_start = 0;
 			continue;
 		}
-		
+
 		ActualThreads = sysctl_khttpd_threads;
 		if (ActualThreads<1) 
 			ActualThreads = 1;
-			
 		if (ActualThreads>CONFIG_KHTTPD_NUMCPU) 
 			ActualThreads = CONFIG_KHTTPD_NUMCPU;
-		
 		/* Write back the actual value */
-		
 		sysctl_khttpd_threads = ActualThreads;
 		
 		InitUserspace(ActualThreads);
@@ -249,87 +244,63 @@
 		if (InitDataSending(ActualThreads)!=0)
 		{
 			StopListening();
+			sysctl_khttpd_start = 0;
 			continue;
 		}
 		if (InitWaitHeaders(ActualThreads)!=0)
 		{
-			I=0;
-			while (I<ActualThreads)
-			{
+			for (I=0; I<ActualThreads; I++) {
 				StopDataSending(I);
-				I++;
 			}
 			StopListening();
+			sysctl_khttpd_start = 0;
 			continue;
 		}
 	
 		/* Clean all queues */
 		memset(threadinfo, 0, sizeof(struct khttpd_threadinfo));
 
-
-		 	
-		I=0;
-		while (I<ActualThreads)
-		{
+		for (I=0; I<ActualThreads; I++) {
 			atomic_set(&Running[I],1);
 			(void)kernel_thread(MainDaemon,&(CountBuf[I]), CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
-			I++;
 		}
 		
 		/* Then wait for deactivation */
-		sysctl_khttpd_stop = 0;
-
-		while ( (sysctl_khttpd_stop==0) && (!signal_pending(current)) && (sysctl_khttpd_unload==0) )
+		/* Remember value of stop count.  If it changes, user must 
+		 * have asked us to stop.  Sensing this is much less racy 
+		 * than directly sensing sysctl_khttpd_stop. - dank
+		 */
+		old_stop_count = atomic_read(&khttpd_stopCount);
+		while ( ( old_stop_count == atomic_read(&khttpd_stopCount)) 
+			 && (!signal_pending(current)) 
+			 && (sysctl_khttpd_unload==0) )
 		{
-			if (atomic_read(&DaemonCount)<ActualThreads)
-			{
-				I=0;
-				while (I<ActualThreads)
-				{
-					if (atomic_read(&Running[I])==0)
-					{
-						atomic_set(&Running[I],1);
-						(void)kernel_thread(MainDaemon,&(CountBuf[I]), CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
-						(void)printk(KERN_CRIT "kHTTPd: Restarting daemon %i \n",I);
-					}
-					I++;
-				}
-			}
+			/* Used to restart dead threads here, but it was buggy*/
 			interruptible_sleep_on_timeout(&WQ,HZ);
-			
-			/* reap the daemons */
-			waitpid_result = waitpid(-1,NULL,__WCLONE|WNOHANG);
-			
 		}
 		
-		
-		/* The user wants us to stop. So stop listening on the socket. */
-		if (sysctl_khttpd_stop!=0)	
-		{
-			/* Wait for the daemons to stop, one second per iteration */
-			while (atomic_read(&DaemonCount)>0)
-		 		interruptible_sleep_on_timeout(&WQ,HZ);
-			StopListening();
-		}
-
-		
-	
+		/* Wait for the daemons to stop, one second per iteration */
+		while (atomic_read(&DaemonCount)>0)
+			interruptible_sleep_on_timeout(&WQ,HZ);
+		StopListening();
+		sysctl_khttpd_start = 0;
+		/* reap the zombie-daemons */
+		do
+			waitpid_result = waitpid(-1,NULL,__WCLONE|WNOHANG);
+		while (waitpid_result>0);
 	}
-	
+	sysctl_khttpd_start = 0;
 	sysctl_khttpd_stop = 1;
+	atomic_inc(&khttpd_stopCount);
 
 	/* Wait for the daemons to stop, one second per iteration */
 	while (atomic_read(&DaemonCount)>0)
  		interruptible_sleep_on_timeout(&WQ,HZ);
-		
-		
-	waitpid_result = 1;
+	StopListening();
 	/* reap the zombie-daemons */
-	while (waitpid_result>0)
+	do
 		waitpid_result = waitpid(-1,NULL,__WCLONE|WNOHANG);
-		
-	StopListening();
-	
+	while (waitpid_result>0);
 	
 	(void)printk(KERN_NOTICE "kHTTPd: Management daemon stopped. \n        You can unload the module now.\n");
 
@@ -344,16 +315,13 @@
 
 	MOD_INC_USE_COUNT;
 	
-	I=0;
-	while (I<CONFIG_KHTTPD_NUMCPU)
-	{
+	for (I=0; I<CONFIG_KHTTPD_NUMCPU; I++) {
 		CountBuf[I]=I;
-		
-		I++;
 	}
 	
 	atomic_set(&ConnectCount,0);
 	atomic_set(&DaemonCount,0);
+	atomic_set(&khttpd_stopCount,0);
 	
 
 	/* Maybe the mime-types will be set-able through sysctl in the future */	   
diff -x '*times*' -x '.*' -x '*.o' -Naur linux-2.4.17-orig/net/khttpd/sysctl.c linux/net/khttpd/sysctl.c
--- linux-2.4.17-orig/net/khttpd/sysctl.c	Fri Feb  9 11:34:13 2001
+++ linux/net/khttpd/sysctl.c	Mon May 27 18:55:19 2002
@@ -64,6 +64,7 @@
 int	sysctl_khttpd_threads	= 2;
 int	sysctl_khttpd_maxconnect = 1000;
 
+atomic_t        khttpd_stopCount;
 
 static struct ctl_table_header *khttpd_table_header;
 
@@ -72,6 +73,8 @@
 		  void *newval, size_t newlen, void **context);
 static int proc_dosecurestring(ctl_table *table, int write, struct file *filp,
 		  void *buffer, size_t *lenp);
+static int khttpd_stop_wrap_proc_dointvec(ctl_table *table, int write, struct file *filp,
+		  void *buffer, size_t *lenp);
 
 
 static ctl_table khttpd_table[] = {
@@ -93,7 +96,7 @@
 		sizeof(int),
 		0644,
 		NULL,
-		proc_dointvec,
+		khttpd_stop_wrap_proc_dointvec,
 		&sysctl_intvec,
 		NULL,
 		NULL,
@@ -307,6 +310,24 @@
 	return 0;
 }
 
+/* A wrapper around proc_dointvec that computes
+ * khttpd_stopCount = # of times sysctl_khttpd_stop has gone true
+ * Sensing sysctl_khttpd_stop in other threads is racy;
+ * sensing khttpd_stopCount in other threads is not.
+ */
+static int khttpd_stop_wrap_proc_dointvec(ctl_table *table, int write, struct file *filp,
+		  void *buffer, size_t *lenp)
+{
+	int rv;
+	int oldstop = sysctl_khttpd_stop;
+	rv = proc_dointvec(table, write, filp, buffer, lenp);
+	if (sysctl_khttpd_stop && !oldstop)
+		atomic_inc(&khttpd_stopCount);
+
+	return rv;
+}
+		
+
 static int sysctl_SecureString (/*@unused@*/ctl_table *table, 
 				/*@unused@*/int *name, 
 				/*@unused@*/int nlen,
diff -x '*times*' -x '.*' -x '*.o' -Naur linux-2.4.17-orig/net/khttpd/sysctl.h linux/net/khttpd/sysctl.h
--- linux-2.4.17-orig/net/khttpd/sysctl.h	Wed Aug 18 09:45:10 1999
+++ linux/net/khttpd/sysctl.h	Mon May 27 17:56:28 2002
@@ -14,4 +14,7 @@
 extern int 	sysctl_khttpd_threads;
 extern int	sysctl_khttpd_maxconnect;
 
+/* incremented each time sysctl_khttpd_stop goes nonzero */
+extern atomic_t	khttpd_stopCount;
+
 #endif
diff -x '*times*' -x '.*' -x '*.o' -Naur linux-2.4.17-orig/net/khttpd/waitheaders.c linux/net/khttpd/waitheaders.c
--- linux-2.4.17-orig/net/khttpd/waitheaders.c	Mon Sep 10 07:57:00 2001
+++ linux/net/khttpd/waitheaders.c	Mon May 27 17:56:28 2002
@@ -134,7 +134,7 @@
 		CurrentRequest = CurrentRequest->Next;
 	}
 
-	LeaveFunction("WaitHeaders");
+	LeaveFunction("WaitForHeaders");
 	return count;
 }
 
@@ -178,6 +178,12 @@
 	
 	EnterFunction("DecodeHeader");
 	
+	if (Buffer[CPUNR] == NULL) {
+		/* see comments in main.c regarding buffer managemnet - dank */
+		printk(KERN_CRIT "khttpd: lost my buffer");
+		BUG();
+	}
+
 	/* First, read the data */
 
 	msg.msg_name     = 0;
--- linux-2.4.17-orig/Documentation/networking/khttpd.txt	Wed Dec 31 16:00:00 1969
+++ linux/Documentation/networking/khttpd.txt	Mon May 27 23:19:03 2002
@@ -0,0 +1 @@
+See net/khttpd/README for documentation on khttpd, the kernel http server.